This sleek, modern bathroom faucet lets you attach a handheld shower set (sold separately) so you can wash up in your RV after a long morning hike. Washerless 1/4-turn stems that prevent leaks so you won't have to worry about wasted water.
Features:
Specs:
The D-spud outlet lets you attach a handheld shower set (sold separately) to make cleaning mud and sand off the kids, pets, and shower walls even easier. To divert the flow of water to the shower set, simply lift the diverter pin on the faucet up.
To install, use the inlet shanks to drop the new faucet in place of your existing faucet. Hand-tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix faucets four inch dual handle RV bathroom diverter faucet. This unit adds or replaces a bathroom faucet in your RV. It's ADA compliant and features a completely lead free design. It's going to feature the dual acrylic levers. These are the handles that gives the unit a really nice look. Each one has the hot and cold indicator on there, H on this one for hot, C on this one for cold.
You see there that it has a nice quarter turn design. Overall the faucet looks really, really nice. The unit's made from a durable plastic construction and features a brushed nickel finish. It does have a low flow aerator installed and that has a flow rate of 2.2 gallons per minute. The D-spud is right here.
This is the D-spud for attaching a hand held sprayer, a hand held shower. Then you got the diverter handle right here. If you connect a hose to that, that's connected to a hand held sprayer, lift up on the diverter. That's all it takes for it to divert the fluid or the water to come out of the D-spud. Then it just goes back down whenever the water isn't being fed through the D-spud connection point. The mounting area's going to require two holes for your installation.
These connectors are for the hot and cold water lines. They're separated on center by four inches. They have a length measurement of around two inches long. Plastic mounting nuts are included. The base itself measures about two inches to two 1/8 of an inch.
Edge to edge this direction is about six and one quarter inches. From the mounting surface to the tallest point of the unit is about three inches tall. Overall depth from front to back is about five inches deep. Then the water outlet height from the mounting surface, from this point go straight out and straight up, that distance right there is about one inch to one and 1/8 of an inch. That's going to do it for today's look at the Phoenix faucets four inch dual handle RV bathroom diverter faucet.
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.